Elector
With motorized, remote volume control, tape monitor path, retro-look-VU-meter and the all superior VOLTAiR technology the Elector brings analog sources to new life.
£2,750
2 Years warrantyFinance example
£550.00 initial 20% deposit then £122.22 per month for 18 months. Other finance terms available. Finance subject to statusElector
£2,750
Milled from Solid
The massive 45mm volume control knob milled from aluminum is a haptic highlight. Its mass together with the motorized Alps RK27 “Big Blue” potentiometer enhances the “spoon in the honey” feeling even further.
The red marker LED ensures good visibility of the volume parameter even in darkened environments. The volume control can be remotely controlled with any infrared remote control. The Elector learns to communicate with it with the simple push of a button.
Source of joy
Up to six (6 !) analog stereo sources can be connected to the Elector. The Elector offers three pairs of balanced inputs with XLR jacks and three standard inputs with gold-plated RCA jacks.
Two mechanical VU meters visualize the input levels for the left and right audio channel. With the VU switch you can optimize the display for different signal levels.
Tape Monitor
A tape monitor circuitry is quite retro. Who still owns a cassette recorder or a tape machine? Who else loops in an equalizer? To put it another way: Who would like to do it and cannot do it because no manufacturer offers a tape monitor circuit anymore? Well, those who want can again.
Today’s audio levels are much higher than in the past and many recorders will be overloaded by them.
In that case simply press the switch and the level to the recorder is lowered by 10 dB. To compensate, the level from the recorder is increased by 10 dB. Et voilà.
Home Theater Bypass
Since the hardware revision 1.1, the Elector features a Home Theater Bypass function. This allows the Elector to be used in combination with a multi-channel home theater system. The L and R channels of the home theater system can be simply connected to Input 6 of Elector. When the Home Theater Bypass is active (DIP 4), Input 6 is no longer affected by the volume control of the Elector.
The VOLTAiR Technology
The 120V technology is our reference technology. The 120V technology is unique in the world. It operates at a DC voltage of 120 volts. This is four times that of IC-based semiconductor op-amps. In our Professional Fidelity series, we refer to this unsurpassed technology as VOLTAiR technology.
The highest possible audio quality requires the highest possible audio operating voltage.
The 120V technology works with +/-60 V. To be able to handle such a high voltage, we have developed special proprietary operational amplifiers that can operate with a DC voltage of +/-60 V: the SPL 120V SUPRA operational amplifiers. This high voltage would destroy conventional components and operational amplifiers.
The 120V technology achieves exceptional technical specifications and sonic benefits. Technically, in terms of dynamic range, signal-to-noise ratio and headroom. Sonically, in terms of richness of detail and an absolutely relaxed listening experience.
By the way, the “120V” in the name of the technology has nothing to do with the local mains voltage from the mains power socket. This is about the operating voltage inside the device with which the audio signals are processed.
The mains voltage from the mains power socket is transformed to the required secondary voltage in the device’s internal linear power supply with toroidal transformer. Rectifiers convert this AC voltage into DC voltage required in the audio device.
Tech spec
Maximum input & output gain
32.5 dBu
Input impedance (RCA)
47 Ω
Input impedance (XLR)
20 Ω
Output impedance
75 Ω
Common mode rejection (XLR)
-81 dBu
Frequency range (-3 dB)
10 Hz – 100 kHz
Crosstalk (1 kHz)
-112 dBu
Noise (A-weighted)
-99 dBu
Dynamic range
132.5 dB
Dimensions W x H x D (width x height incl. feet x depth)
278 x 100 x 300 mm / 11 x 4 x 11.81 inch
Unit weight
4.25 kg / 9.37 lbs
POPULAR CATEGORIES