M32
The Bricasti M32 delivers 50% more current than M28, with high-current capability and a fully differential signal path. Its 250W into 8 ohms, 500W into 4 ohms and safety-limited 1000W into 2 ohms support low-distortion, harmonically accurate performance with very low noise.
Or speak to a specialist, 01202 911886
0% Finance Available
Finance example
£4,000.00 initial 20% deposit then £533.33 per month for 30 months. Other finance terms available. Finance subject to status.
Spread the cost with interest-free monthly payments through Novuna Consumer Finance, subject to status and affordability. Available on qualifying purchases. Terms and conditions apply.
The M32 provides 50% more current delivery than the M28, with high current capability, very low noise and low distortion, together with reduced power supply ripple. Its output is 250W into 8 ohms, 500W into 4 ohms, and current limited to 1000W into 2 ohms for safety. Peak power exceeds 1kW into 4 ohms.
Not every device is balanced throughout its signal path. The M32 uses a fully differential design to provide fast, low-distortion and harmonically accurate performance. When paired with a fully differential digital-to-analogue converter from the Bricasti range, it forms a fully balanced system from source to speaker.
The revised chassis accommodates a larger power transformer and increases the separation between the power components and the amplifier's voltage and current gain sections. This arrangement achieves very low noise performance, with no practical interference between the power supply components and the gain sections.
| Total Harmonic Distortion | THD+N less than 0.005% 20hz-20kHz at full rated power into 8, 4 and 2 ohms. |
|---|---|
| Power | 200W into 8 ohms, 400W into 4 ohms, 800W into 2 ohms. |
| Frequency response | 10hz-150kHz, within 0.5db. |
| Signal to Noise | greater than 95db at full rated. |
| Power Topology | Fully Differential, bi polar. |
| Balanced Input | XLR connector 200k ohm impedance. |
| Unbalanced Input | RCA connector 100k ohm impedance. |
| Weight | 105 lbs. |
| Shipping Weight | 123 lbs. |
| Finish | Anodized Aluminum. |
| Mains Voltage set at factory | 100, 120, 220, 230, 240 VAC, 50 Hz - 60 Hz. |
| Trigger In | TRS connector for 5V external trigger. |
| Input Trim | 0db, -6db, -12db,-18db of attenuation. |
| Power consumption | 60W standby, 2W idle. |
| Delivery | UK delivery available |
|---|---|
| Lead time | Agreed personally, finish and stock dependent |
| Warranty | 2 years warranty |
| Trade-in | Part exchange available (subject to conditions) |
More in Power Amplifiers
Related products
Jordan Acoustics Ltd is authorised and regulated by the Financial Conduct Authority. We are a credit broker and not a lender. Credit is provided by Novuna Consumer Finance. Finance is subject to status and affordability. Terms and conditions apply.
