Bryston

SP3

The SP3 is the next step in the evolution of high performance audio quality and interoperability.

£12,500

20 year warranty

Finance example

£2,500.00 initial 20% deposit then £333.33 per month for 30 months. Other finance terms available. Finance subject to status

SP3

£12,500

The Bryston SP3 is designed to be a superb surround sound processor which delivers outstanding home theatre performance by integrating the latest digital innovations with high precision, low noise, fully discrete analog audio amplifier stages. With the inclusion of HDMI inputs, this brings the SP3 to the next step in the evolution of high performance audio quality and interoperability.

Analog Inputs: 2x XLR Balanced Pairs, 4x RCA Single Ended Pairs, RCA Single Ended (7.1 Surround), 4x RCA Single Ended Pairs (Tape Loop, Digital Video Recorder)
Digital Inputs: 8x HDMI, 2x AES/EBU (XLR), 3x Optical (TOSLINK), 4x SPDIF (RCA), USB 2.0
Analog Outputs: XLR Balanced (7.1 Surround), RCA Single Ended (7.1 Surround, Zone 2), ¼” Headphone Jack
Digital Outputs: 2x HDMI, Optical (TOSLINK)
Control Inputs: RS-232 (DB9), Ethernet (RJ-45), AUX IR

Features:

  • 7.1, 6.1 and 5.1 surround sound
  • Dolby True HD, Digital Plus, Digital EX, Pro Logic IIx
  • DTS-HD master audio, Dolby volume
  • Class A discrete audio circuits
  • Separate digital and analog power supplies
  • Second zone output via single ended pair which allows for separate audio from another source
  • RS-232 serial data port for remote control via Crestron, AMX or similar control systems
  • Remote control included

Options:

  • Available with silver or black faceplate
  • 17” or 19” faceplate available (non-rack mountable)
  • Rack mountable option available

Tech spec

A/D Conversion:

24-Bit, 192 kHz Delta-Sigma

D/A Conversion:

24-Bit, up to 192 kHz Delta-Sigma

DSP Engine:

TI DA710

Power Supply:

Separate off-line standby PSU plus & main linear power supply with toroidal power transformer utilising multiple regulation stages.

Frequency Response:

20 Hz to 20 kHz +/- 0.25 dB

Low Frequency Cutoff:

0.3 Hz (all speakers channels in Bypass mode)
1.8 Hz (LARGE Speakers and SubWoofer in Analog, Digital or HDMI)
40-200 Hz (variable cutoff point; default 80 Hz) SMALL speakers, except SubWoofer, in Analog, Digital or HDMI)

High Frequency Cutoff:

40-200 Hz (variable cutoff point; default 80 Hz) (SubWoofer in Analog, Digital or HDMI)
22 kHz (all speakers, except SubWoofer, in Analog, Digital or HDMI)
180 kHz(all speaker channels in BYPASS)

THD+Noise:

< 0 .006% in DSP modes; < 0.0025% in Bypass mode 20Hz to 20kHz at maximum output level.

Signal-to-Noise Ratio:

105dB in DSP Modes; 110dB in 2ch Bypass Mode; 22 kHz bandwidth, Ref. 1 kHz at max. output

Input Level:

2 Vrms in DSP modes; 4 Vrms in Bypass Mode

Input Impedance:

50 kOhms for single-ended analog audio, 1K Ohms for balanced analog inputs

Output Level:

8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode.

Output Impedance:

110 Ohms

Bass Management:

2nd Order HP filter(x5), 4th Order LP filter 40 – 200 Hz Crossover Freq.

DATA & CONTROL PORTS:

1x Infra-Red sensor; remote control receiver
1x Ethernet (RJ45 connector): bilateral data, software download, etc.
1x mini (3mm) phone jack (2 conductor) for auxilliary infra-red control data input

Dimensions:

17”W x 14.25”D (not including knobs & connectors) x 5.75”H (not including rubber feet)
17”W x 15.38”D (including knobs & connectors) x 6.25”H (including rubber feet)

Weight:

approx 22 lbs (10 kg)

For more information click here to visit the Bryston website

Basket

You haven't added any products to your basket. Why not look for some now?