Burmester

B10

Loudspeakers, Stand Mount

£3,140
0% Finance Available
Enquire

This product has a 5 year warranty.

Finance Example

£628 initial 20% deposit then

£104.67 per month for 24 months

Other finance terms available

The B10 loudspeaker was originally designed as a nearfield studio monitor to be used exclusively for sound recordings in Dieter Burmester’s private studio. As a result of its tremendous success the idea was later adapted to create a surprisingly good shelf loudspeaker which does not take up a lot of room.

Features:

· Low-vibration cabinet walls made of 19mm MDF (medium-density fibreboard) with additional internal struts
· Baffle in sandwich construction up to 48mm thick. This results in low resonance levels and high sound neutrality in the fundamental range
· Reflex construction for low bass distortion. Bass-reflex tunnel in the back wall of the cabinets, can be closed off with the foam cylinder supplied to damp the bass reproduction to a degree
· Bass notes can be boosted to a degree by means of the switch on the rear terminal box
· Special dimensioning of lower mid-range units and frequency crossovers for unusually fast fundamental transients (approx. 200Hz to 2kHz)
· 17cm lower mid-range units with strong magnets and special glass-fibre membranes to maximise efficiency factor and reproduction precision
· Ringtweeter for extremely accurate, stable-level overtone reproduction
· Despite the compact dimensions, suitable for medium-sized rooms (up to 30m²)
· Internal wiring comprises 4mm² pure copper strand for lossless transmission of all signals
· Felt pads for decoupling and surface protection

Specifications:

Dimensions (W x H x D): 220 x 390 x 280mm / 8.7” x 15.4” x 11”
Weight per speaker: 11.5 kg / 25.4 lbs
Frequency response: 50 Hz-24 kHz
Rated power: 80 watts
Efficiency: 2.83V/1m 8 7 d B
Nominal impedance: 4 ohms
Crossover frequencies: 2,300Hz
Bass units: 170mm Æ in bass reflex housing
High-frequency: units Ringtweeter
Finish: French Walnut, Makassar, high-gloss white