The Nano Phono phonostage isn’t ruffled by anything. External interferences are no longer an issue with this fine piece of engineering.
Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.
The Nano Phono Headphone additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.
|Amplification @ 1 kHz||34 dB to 48 dB (MM mode) 54 to 68 dB (MC mode)|
|Input impedance||47 kOhm / 220 pF / MM mode Individual / User / MC mode|
|MM / MC input||switchable by jumper (at bottom)|
|Subsonic Filter||switchable by jumper (at bottom)|
|RIAA||delay time: 75 μs / 318 μs / 3180 μs|
|RIAA accuracy||± 0.4 dB @ 20 Hz - 50 kHz|
|THD||< 0,006% MC ("A" weighted @ 1 kHz / -1 dB @ Max)|
|Headroom||18 dB / MC|
|Signal to noise ratio||70 dB ("A" Weighted) 81 dB ("A" Weighted)|
|Channel separation||> 80 dB @ 1 kHz / opposed channel hot-wired|
|Max. output voltage||10 V eff. (1 kHz)|
|Power supply||± 18 V DC / 300 mA (external power supply)|
|Input / Outputs||unbalanced (RCA)|
|Power consumption||Max. consumption: 2.3 Watt Consumption in operation: 2.3 Watt Standby mode: < 0.3 Watt Off mode: 0.0 Watt|
|Total weight||500 gram (Phonostage and power supply)|
|Dimensions (W/D/H in inches)||3.35 x 4.17 x 0.98|
|Dimensions (W/D/H in mm)||85 x 106 x 25|